Holly Springs, NC · Decks and fences
Decks and fences in Holly Springs
Holly Springs needs no fence permit but holds front fences to 4 ft and back fences to 6 ft. Pool fences have stricter rules, and we build to them.
Typical prices for Holly Springs projects
Raleigh-area ranges from published 2026 data, via our price tool. Your written estimate is for your lot.
150 ft of four-foot aluminum pool-style fence
$3,750 – $7,500
Angi national: $25 to $50 per foot for aluminum picket styles.
20-by-20 ft raised pressure-treated deck
$16,000 – $20,000
Upper half of Angi's Raleigh range.
Sources and dates
- Angi: Wood fence installation cost in Raleigh, NC (2026 data) page updated 2026-08-04
- Angi: Vinyl fence cost in Raleigh page updated 2026-02-25
- Angi: Vinyl fence cost (2026 data) page updated 2026-10-28
- Angi: Chain-link fence cost in Raleigh page updated 2026-08-09
- Angi: Aluminum fence cost (2026 data, national) page updated 2026-09-23
- Angi: How much does it cost to build a deck in Raleigh? (2026 data) page updated 2026-08-04
- Zonda Cost vs Value Report 2025: Raleigh, NC (Journal of Light Construction) 2025 report
Last checked 2026-11-14
How it works
How your project works
Tell us about it
Send the form or call. We ask a few questions and book a free estimate visit at a time that suits you.
Free written estimate
We measure, talk through materials and give you a written price, scope and schedule. No pressure, no deposit to look.
Permits and HOA
We draw the plans, pull the permit, call 811 and help with your HOA form, so the build starts clean.
Build and walk-through
Our crew builds to the plan, passes the inspections and walks the finished job with you before the final payment.
Our work
Kinds of decks and fences we build
Holly Springs permits for decks and fences
Holly Springs rules, from the Town's pages:
- Fences: no Town permit, though some fence and wall types may need one. Heights: 4 ft in the front yard; 4 ft in a side-corner yard (6 ft behind half the house depth); 6 ft in side-interior and rear yards. Fences can go to the lot line, and the finished side faces out.
- Pools, spas and hot tubs over 24 inches deep need a permit, and every one needs a barrier at least 4 ft high with a self-closing, self-latching gate.
- Decks and screened porches over 12 ft in any direction, or attached to the house, use the 'Building Construction - Residential' application in the CityView portal.
We call 811 before we dig any footing or post hole. North Carolina law asks for at least three full working days' notice so utilities can mark their lines.
Sources and dates
- Town of Holly Springs: Fences checked 2026-11-14
- Town of Holly Springs: Pools, spas and hot tubs checked 2026-11-14
- Town of Holly Springs: Sheds and accessory structures checked 2026-11-14
- NC General Statutes 87-122: Notice before digging (NC 811) checked 2026-11-14
Last checked 2026-11-14
Holly Springs deck and fence questions
Do I need a permit for a fence in Holly Springs?
Not for a normal residential fence. The Town still sets heights: 4 ft in front, 6 ft in side-interior and rear yards.
What fence do I need around a pool in Holly Springs?
A barrier at least 4 ft high, measured on the outside, with a self-closing, self-latching gate. Aluminum works well.
Does my deck need a permit in Holly Springs?
Yes if it is attached to the house or more than 12 ft in any direction, using the residential building application in CityView.
Building in Holly Springs
We build in Holly Springs, ZIP 27540. The Town reminds owners that neighbourhood covenants are theirs to follow, so we bring HOA-ready drawings to every Holly Springs estimate.
What we build here
Get your free Holly Springs estimate
Tell us the project and your address. We check your lot's rules before we quote.
Get my free estimateTowns we serve
Pick your town for its own permit rules and local notes.
Ready to price your project?
Tell us about your deck, fence, porch or pergola. We will call you within one business day.
Calls answered 7 days a week