Clayton, NC · Decks and fences
Decks and fences in Clayton
Clayton needs a building permit for a deck and a Zoning Compliance Permit for a fence up to 6 ft. We draw the site plan and file both.
Typical prices for Clayton projects
Raleigh-area ranges from published 2026 data, via our price tool. Your written estimate is for your lot.
20-by-20 ft pressure-treated deck, low
$12,000 – $16,000
Angi's 2026 Raleigh range, lower half for a low deck.
150 ft of four-foot chain link
$1,200 – $2,850
Angi Raleigh: $8 to $19 per foot at 4 ft.
Sources and dates
- Angi: How much does it cost to build a deck in Raleigh? (2026 data) page updated 2026-08-04
- Zonda Cost vs Value Report 2025: Raleigh, NC (Journal of Light Construction) 2025 report
- Angi: Wood fence installation cost in Raleigh, NC (2026 data) page updated 2026-08-04
- Angi: Vinyl fence cost in Raleigh page updated 2026-02-25
- Angi: Vinyl fence cost (2026 data) page updated 2026-10-28
- Angi: Chain-link fence cost in Raleigh page updated 2026-08-09
- Angi: Aluminum fence cost (2026 data, national) page updated 2026-09-23
Last checked 2026-11-14
How it works
How your project works
Tell us about it
Send the form or call. We ask a few questions and book a free estimate visit at a time that suits you.
Free written estimate
We measure, talk through materials and give you a written price, scope and schedule. No pressure, no deposit to look.
Permits and HOA
We draw the plans, pull the permit, call 811 and help with your HOA form, so the build starts clean.
Build and walk-through
Our crew builds to the plan, passes the inspections and walks the finished job with you before the final payment.
Our work
Kinds of decks and fences we build
Clayton permits for decks and fences
Clayton's rules, from the Town's planning pages:
- Decks, pools and home additions need a Building Permit; zoning is checked inside it.
- Fences and walls up to 6 ft need a Zoning Compliance Permit. Fences over 6 ft need a Building Permit.
- The fence site plan must show distances to every lot line, known easements, the fence height, and any tie-in to a neighbour's fence, which needs that owner's consent.
- Starting without a permit counts as a zoning violation.
- Outside town limits in Johnston County, Johnston County Building Inspections in Smithfield issues permits.
We call 811 before we dig any footing or post hole. North Carolina law asks for at least three full working days' notice so utilities can mark their lines.
Sources and dates
- Town of Clayton: Planning FAQs checked 2026-11-14
- Town of Clayton: Requirements for a fence site plan (PDF) checked 2026-11-14
- Johnston County: Building Inspections checked 2026-11-12
- NC General Statutes 87-122: Notice before digging (NC 811) checked 2026-11-14
Last checked 2026-11-14
Clayton deck and fence questions
Do I need a permit for a fence in Clayton?
Yes. Fences up to 6 ft need a Town Zoning Compliance Permit with a site plan; taller fences need a Building Permit.
Do I need a permit for a deck in Clayton?
Yes, a Building Permit from the Town. If you are outside town limits, Johnston County issues it.
Can my new fence connect to my neighbour's fence?
Only with the neighbour's consent, and the site plan has to show it. We get that in writing before we build.
Building in Clayton
We build in Clayton, ZIPs 27520 and 27527, in town and on county lots around it. Clayton straddles Johnston and Wake counties, so we confirm which office has your parcel before we file.
What we build here
Get your free Clayton estimate
Tell us the project and your address. We check your lot's rules before we quote.
Get my free estimateTowns we serve
Pick your town for its own permit rules and local notes.
Ready to price your project?
Tell us about your deck, fence, porch or pergola. We will call you within one business day.
Calls answered 7 days a week