Raleigh, NC · Decks and fences
Deck builders in Raleigh
New and replacement decks in pressure-treated wood or composite, built to code and permitted, with a written price before we start.
What a new deck costs around Raleigh
Published 2026 Raleigh figures. Your written estimate depends on size, height, decking, railings, stairs and your yard.
Typical cost per square foot
$30 to $50
Angi's 2026 Raleigh range for most new decks. The top of the range is for raised decks, premium wood and custom designs.
A 16-by-20 ft deck with stairs and railing
$16,441 wood · $23,545 composite
Average Raleigh job cost in the 2025 Cost vs Value Report, including a bench, a planter and a three-step stair.
Sources and dates
- Angi: How much does it cost to build a deck in Raleigh? (2026 data) page updated 2026-08-04
- Zonda Cost vs Value Report 2025: Raleigh, NC (Journal of Light Construction) 2025 report
Last checked 2026-11-14
Instant price
See your deck price in 30 seconds
Pick your options for a typical price range. No email, phone or address required.
Typical price
Your exact price comes from a free on-site estimate.
Get my exact priceSee the full price table
| Deck size | Ground level or low (under 30 in), pressure-treated wood | Ground level or low (under 30 in), composite | Raised (needs guards and stairs), pressure-treated wood | Raised (needs guards and stairs), composite |
|---|---|---|---|---|
| 12 x 12 ft (144 sq ft) | $4,300 – $5,800 | $6,200 – $8,200 | $5,800 – $7,200 | $8,200 – $10,300 |
| 16 x 20 ft (320 sq ft) | $9,600 – $12,800 | $13,700 – $18,300 | $12,800 – $16,000 | $18,300 – $22,900 |
| 20 x 20 ft (400 sq ft) | $12,000 – $16,000 | $17,200 – $22,900 | $16,000 – $20,000 | $22,900 – $28,600 |
Raleigh ranges from Angi (2026: $30–$50 per sq ft for most new decks). Composite is scaled by the Raleigh wood-to-composite ratio in the 2025 Cost vs Value Report. Raised decks use the upper half of Angi's range.
What a complete deck build includes
A complete deck from us covers:
- A drawn plan with the size, height, footings, beams and joists
- The building permit, inspections and an 811 utility locate
- Concrete footings at least 12 inches below grade into firm soil
- A ledger bolted to the house with flashing behind it, or a freestanding frame
- Decking, railings, stairs and any gates
- Cleanup and haul-away of the old deck if we are replacing one
Your estimate names the products, the board colour and the railing style, and says what is not included.
Sources and dates
- Town of Apex: Guide to planning and constructing a deck (PDF) checked 2026-11-14
- City of Raleigh: Deck brochure (PDF) checked 2026-11-14
Last checked 2026-11-14
Decks we build
Ground-level and low decks
Under 30 inches, often no guard rail needed. The lowest cost per square foot and a quick build.
Raised decks
Off a kitchen or second-floor door, with guards at least 36 inches high, stairs and bracing where the code calls for it.
Multi-level decks
Two levels that step down a sloped yard, joined by wide stairs.
Deck replacement
Tear-off, a check of the old footings and framing, then a new frame or new boards, depending on what we find.
Wood or composite?
Both last when they are built right. The choice comes down to budget, upkeep and how much sun the deck gets.
| Decking | Material cost (boards only) | Upkeep | Good to ask |
|---|---|---|---|
Pressure-treated pine | $2 to $4 per sq ft | Clean and seal it every year or two; it can check and splinter in Raleigh's heat and humidity | Which grade of board? When can it be stained? |
Composite (capped) | $10 to $19 per sq ft | Wash it; no staining or sealing | Which product line and colour? Does a light colour stay cooler in full sun? Hidden or face fasteners? |
Cedar | $3 to $6 per sq ft | Softer than pine; seal it to slow graying | Will it touch the ground anywhere? |
Sources and dates
- Angi: How much does it cost to build a deck in Raleigh? (2026 data) page updated 2026-08-04
Last checked 2026-11-14
What moves the price
Two decks of the same size can price very differently. These are the reasons.
| Factor | Why it matters |
|---|---|
Height | Raised decks need taller posts, guards, stairs and sometimes bracing. Angi puts raised decks at the top of the $30 to $50 range. |
Decking | Composite boards cost several times as much as pressure-treated boards: $10 to $19 against $2 to $4 per sq ft before labour (Angi, Raleigh). |
Railings | Wood, aluminum and composite railing systems price very differently per foot. |
Stairs | More risers, landings and handrails add cost; Angi lists $20 to $40 per stair. |
Your yard | Slope, access for materials, roots and old footings to remove. |
Add-ons | Lighting, outlets, built-in benches, skirting and a screened room later. |
Sources and dates
- Angi: How much does it cost to build a deck in Raleigh? (2026 data) page updated 2026-08-04
Last checked 2026-11-14
How your project works
Tell us about it
Send the form or call. We ask a few questions and book a free estimate visit at a time that suits you.
Free written estimate
We measure, talk through materials and give you a written price, scope and schedule. No pressure, no deposit to look.
Permits and HOA
We draw the plans, pull the permit, call 811 and help with your HOA form, so the build starts clean.
Build and walk-through
Our crew builds to the plan, passes the inspections and walks the finished job with you before the final payment.
Built to the NC deck rules
Inspectors check the same points on every deck, and so do we:
- Footings: concrete, into undisturbed soil, bottom at least 12 inches below grade
- Ledger: bolted or screwed to the house band, with non-aluminum flashing behind it
- Guards: at least 36 inches high once the deck is more than 30 inches above grade, with openings under 4 inches
- Stairs: risers no taller than 8-1/4 inches, treads at least 9 inches, a handrail once there are 4 or more risers
- Inspections: open footing, framing and final
Sources and dates
- Town of Apex: Guide to planning and constructing a deck (PDF) checked 2026-11-14
- City of Raleigh: Deck brochure (PDF) checked 2026-11-14
Last checked 2026-11-14
Kinds of decks and fences we build
Material and style examples. Ask to see the options in person at your estimate.
Deck questions
How much does it cost to build a 14-by-20-foot deck?
Angi's 2026 Raleigh table puts a 14-by-20 ft deck at $8,400 to $14,000. Composite, a raised deck or a big stair moves it higher. Try the price tool above, then get your exact price.
What is the most expensive part of building a deck?
Usually the decking and the railings, then height. Composite boards cost several times more than pressure-treated, and a raised deck adds posts, guards and stairs.
What is the downside of composite decking?
The up-front cost, and dark boards get hot in full sun. You skip the yearly staining and sealing that pressure-treated wood needs.
Can you replace just the boards?
Often, yes. If the frame and footings are sound we can re-deck it, and state law needs no permit to replace decking, railings or stair treads. We check the frame at your estimate and tell you straight.
Ready to price your deck?
Tell us the size and where it goes. Nothing is booked until you say yes.
Get my free estimateTowns we serve
Pick your town for its own permit rules and local notes.
Ready to price your project?
Tell us about your deck, fence, porch or pergola. We will call you within one business day.
Calls answered 7 days a week